hot rolled beam HEB160 S355J2 steel beam h
Model: HEB160 h-shaped beam
Height: 160 mm
Width: 160 mm
Web thickness: 8 mm
Flange thickness: 13 mm
Weight per meter: about 42.6 kg.
S355J2 h-shaped iron beam material
1. Chemical composition
Carbon (C): Less than or equal to 0.22%
Silicon (Si): Less than or equal to 0.55%
Manganese (Mn): Less than or equal to 1.60%
Phosphorus (P): Less than or equal to 0.025%
Sulfur (S): Less than or equal to 0.025%.
2. Mechanical properties
Yield strength: Greater than or equal to 355 MPa
Tensile strength: 470-630 MPa
Elongation: Greater than or equal to 22%
Impact toughness: Good impact performance at -20 degree .
3. Features
High strength, yield strength of 355 MPa, suitable for structures that need to bear large loads.
Good low-temperature toughness, especially suitable for use in cold areas.
Excellent welding performance, suitable for a variety of welding methods, convenient for on-site construction.
4. Application fields
Construction field: used for beams, columns and supporting structures of high-rise buildings, large shopping malls and stadiums.
Bridge field: suitable for load-bearing beams and supporting structures of bridges and bridges.
Features and advantages of HEB160 h steel profile
Cross-section optimization: HEB series H-beams have symmetrical cross-section shapes, which are convenient for evenly distributing loads; the wide flange design improves the bending and shear resistance of the structure.
Economic efficiency: Compared with welded I-beams, HEB profiles have small residual stress, high processing accuracy and low comprehensive cost; the material consumption can be reduced by optimizing the design, thereby improving the economy of the project.
Lightweight and high strength: HEB160 profile has high strength and rigidity, and its dead weight is relatively light, which is convenient for transportation and installation.
HEB160 steel h profile made of S355J2 has high strength, good low-temperature toughness and excellent welding performance, and is widely used in high-rise buildings, bridges, ships and machinery manufacturing. Compared with S355JR, S355J2 performs better in low-temperature environments and is suitable for engineering scenarios with higher requirements for toughness and safety.


